Still EXG-10, Original Instructions Manual

Page: 84 / 152

5
Maintenance
General maintenance information
General maintenance information
General
The following instructions contain all the in-
formation needed for truck maintenance. It
is necessary to carry out the various main-
tenance operations according to the mainte-
nance plan. The truck will then be ready for
service, will continue to be reliable and the
warranty can be applied.
0.0
h
0252_003-065-V2
Service plan
Maintenance work must be carried out ac-
cording to the hour meter. Please consult the
truck’s maintenance plan.
The service plan is followed by advice to
facilitate work.
Maintenance intervals must be reduced if the
truck is used under harsh conditions (extreme
heat or extreme cold, large quantities of dust).
Grade and quantity of lubricants and
other consumables
Only lubricants and other consumables
specified in these operating instructions are
authorised for use during maintenance work.
Lubricants and other consumables required
for truck maintenance are listed in the mainte-
nance specifications table.
Never mix different qualities of grease or oil.
If it is absolutely necessary to change brands,
make sure to flush thoroughly beforehand.
Before changing any filters or working on
the hydraulic system, thoroughly clean the
surface and the areas around the part.
All containers used to pour oil must be clean.
Servicing and maintenance personnel training and qualification
Truck maintenance can only be carried out by
qualified and authorised personnel.
The annual inspection for prevention of
accidents at work must be carried out by a
person qualified to do so. The person carrying
out this inspection must provide their expertise
and opinion without being influenced by
economic factors or company internal issues.
Safety is the only critical deciding factor.
78 1170 801 15 09 [EN]