Still EXG-10, Original Instructions Manual

Page: 78 / 152

4
Use
Handling the battery
Side access battery; selection of
battery compartment opening side
Depending on the installation, you can choose
the side from which the battery is removed.
To switch the battery removal direction:
– Turn around the stop with its rubber buffers
(3).
– Turn around the locking system (2).
– Turn around the battery locking safety
sensor (1).
Once the stop and its rubber buffers have
been turned around, carry out the following 2
adjustments:
• 1) Battery stop adjustment
• 2) Buffer adjustment
1) Battery stop adjustment
– When fitting the buffer support stop, ensure
that it is correctly positioned against its 2
brackets without any play (4).
2) Buffer adjustment
– Once the buffer support stop is locked
in place, ensure that the buffers (3) are
adjusted to the correct height (they are
adjustable in order to ensure proper contact
with the battery tabs).
NOTE: The buffers must not catch the battery
case when it is being handled.
72 1170 801 15 09 [EN]