Stiga ST 266 HW, Operator'S Manual

Page: 32 / 47

EN - 4
injury associated with snow throwers. Never use
your hand to clean out the discharge chute.
b) To clear the chute:
1) SHUT THE MACHINE OFF!
2) Wait 10 s to be sure the impeller blades have
stopped rotating.
3) Always use a clean-out tool, not your hands.
3.5 MAINTENANCE AND STORAGE
• Let the engine cool down before storing the
snowplough indoors.
• Never leave fuel in the tank if the machine is
stored in a building where the fuel vapours can
come into contact with open flames, sparks or
sources of heat.
• To reduce fire risks, do not leave containers
with debris inside a room.
• Always refer to instruction handbook for
important details if the snow thrower is to be
stored for an extended period.
• Check shear bolts and other bolts at frequent
intervals for proper tightness to be sure the
equipment is in safe working condition.
• Maintain or replace safety labels, as necessary.
• Run the machine a few minutes after throwing
snow to prevent freeze-up of the collector/
impeller.
• When cleaning, repairing or inspecting the
snow thrower, stop the machine and make
certain the collector/impeller and all moving
parts have stopped.
3.6 TRANSPORT
• If the machine must be transported on a
truck or trailer, always use access ramps of
adequate resistance, width and length.
• Load the machine with the motor switched off
and pushed by an adequate number of people.
• During transport, close the fuel tap (if
available) and properly secure the machine to
the transport vehicle using ropes or chains.
3.7 ENVIRONMENTAL PROTECTION
Protecting the environment must be a significant
and top priority for machine use, to the benefit of
civil co-habitation and of the environment that we
live in.
• Avoid being an element of disturbance to the
surrounding area.
• Adhere strictly to the local regulations
governing the disposal of packaging, oil, fuel,
filters, damaged parts or any other element
which may have an impact on the environment;
this waste must not be disposed of with regular
waste, but must be separated and taken to
collection centres, which will recycle the
materials.
• When the machine is withdrawn from service,
do not dispose of it in the environment, but take
it to a waste disposal facility in accordance with
the local regulations in force.
4. ABOUT THE MACHINE
4.1 MACHINE DESCRIPTION
AND INTENDED USE
This machine is a snowthrower.
The machine is equipped with a snow clearing
auger, protected by a cover, which sends the
snow into a discharge chute. The auger is driven
by the engine, which also provides traction to the
machine.
The machine is operated using the controls on the
dashboard.
The operator can operate the machine and use the
main controls, always standing at the operator's
position, behind the machine.
4.1.1 Intended use
This machine is designed and built for snow
clearing, removal and ejection from side-walks,
gardens, driveways and other surfaces at ground
level.
The snowthrower must be used exclusively for
snow removal.
4.1.2 Improper use
Any other use that does not comply with the
above, can be dangerous and cause damage to
people and/or property. Examples of improper use
may include, but are not limited to:
• Using the machine on surfaces above the
ground level, such as building roofs, garages,
porches or other structures or buildings.
• Operating the auger when there are elements
different from snow (for example, soil, grass,
pebbles, etc.).
• Towing or pushing loads.
• Transporting children or other passengers.
IMPORTANT Improper use of the machine will
void the warranty and relieves the Manufacturer of
any liability, placing all responsibility for damage
or injury, to him/herself or third parties, on the user.
4.1.3 Type of users
This machine is intended for use by consumers,
i.e. non-professional operators. It is intended for
"hobby-related activities".