Stiga ST 266 HW, Operator'S Manual

Page: 41 / 47

EN - 13
• It is advisable to send your machine once a year
to an Authorised Service Centre for servicing,
assistance and safety device inspection.
11. WARRANTY COVERAGE
The warranty covers all material and manufacturing
defects. The user must follow all the instructions
provided in the accompanying documentation.
The warranty does not cover damage caused by:
• Failure to become familiar with the
documentation accompanying the machine.
• Carelessness.
• Incorrect or prohibited use or assembly.
• Use of non-genuine spare parts.
• Use of attachments not supplied or not
approved by the manufacturer.
The warranty does not cover:
• Normal wear and tear of consumables, such as
drive belts, augers, headlights, wheels, safety
bolts and wires.
• Normal wear and tear.
• Engines. Engines are covered by the warranty
provided by the relative manufacturer in
compliance with the specified terms and
conditions.
The purchaser is protected by his or her own
national legislation. The purchaser’s rights under
the national laws or his or her own country are not
in any way restricted by this warranty.
12. MAINTENANCE TABLE
Intervention Frequency Paragraph
MACHINE
Check all fasteners Before each use 7
Safety checks/check controls Before each use 7.2
General cleaning and inspection After each use 8.4
Clean the discharge area 5 hours / after every use 8.4
Lubricate the drive shaft 25 hours / after every season ***
Lubricate the auger shaft 10 hours / after every season 8.8
ENGINE
Cleaning the spark plug every 100 hours ***
Spark plug replacement after every season ***
Check / Top up engine oil level after every use 8.3.1
Replacement of the engine oil after every 6 month 8.3.2
*** Interventions that must be carried out by your Dealer or by an Authorised Service Centre