Stiga ST 266 HW, Operator'S Manual

Page: 29 / 47

EN - 1
1. GENERAL INFORMATION
1.1 HOW TO READ THIS MANUAL
Some of the paragraphs in this manual contain
particularly important information in terms of safety
and operation, and are highlighted differently,
according to the following criteria:
NOTE or IMPORTANT These give details or
further information on what has been previously
indicated and aim to prevent damage to the
machine or cause other damage.
The symbol represents a danger. Failure to
observe the warning can lead to possible personal
and/or third party injury and/or damage.
The paragraphs highlighted in a dotted grey
square indicate optional characteristics
not available on all models documented
in this manual. Check if the characteristics
are available on this model.
Whenever reference is made to a position on the
machine "front", "back", "left" or "right" hand side,
this refers to the operator's working position.
1.2 REFERENCES
1.2.1 Figures
The figures in these instructions for use are
numbered 1, 2, 3, etc.
Components shown in the figures are marked A,
B, C, etc.
Reference to component C in figure 2 is indicated
with the wording: "See fig. 2.C" or simply "(Fig.
2.C)".
The figures are provided by way of example. The
actual pieces can differ from those illustrated in
this document.
1.2.2 Titles
The manual is arranged in chapters and
paragraphs. The title of paragraph '2.1 Training" is
a sub-title of "2. Safety regulations". References
to titles or paragraphs are marked with the
abbreviation chap. or para. and the relevant
number. Example: “chap. 2” or “para. 2.1.
WARNING!: READ THIS MANUAL CAREFULLY BEFORE
USING THE MACHINE. Keep safe for future use.
EN
INDICE
1. GENERAL INFORMATION ........................... 1
2. GENERAL SAFETY WARNINGS ................. 2
3. SNOW THROWER SAFETY WARNINGS .... 2
4. ABOUT THE MACHINE ................................ 4
4.1 Machine description and intended use.. 4
4.2 Safety signs .......................................... 5
4.3 Identification label ................................ 5
4.4 Main components ................................. 5
5. ASSEMBLY ................................................... 6
5.1 UNPACKING ......................................... 6
5.2 Levelling shoes ..................................... 6
6. CONTROLS.................................................. 6
6.1 COntrols on the engine ......................... 6
6.2 COntrols on the DASHBOARD .............. 7
7. USING THE MACHINE ................................. 8
7.1 Preliminary operations .......................... 8
7.2 Safety checks ........................................ 8
7.3 Starting / operation ................................ 8
7.4 Stop ...................................................... 9
7.5 Operating suggestions .......................... 9
7.6 After use ................................................ 9
8. MAINTENANCE ......................................... 10
8.1 General Information ............................ 10
8.2 Refuelling ............................................ 10
8.3 Check/top-up engine oil ...................... 10
8.4 Cleaning .............................................. 11
8.5 Spark plug ........................................... 11
8.6 Carburettor .......................................... 11
8.7 Nuts and bolts ..................................... 11
8.8 Auger shaft .......................................... 11
9. STORAGE .................................................. 11
10. ASSISTANCE AND REPAIRS ..................... 11
11. WARRANTY COVERAGE .......................... 12
12. MAINTENANCE TABLE .............................. 12
13. TROUBLESHOOTING ............................... 13