Fuselage Cont.
☐
Fit and bond landing gear alignment plates
F14 to tabs of F10’s and on top of F12.
Note:
Arrows on plates point toward each other.
☐
Fit former F15 to slots at rear of one fuselage
side.
Do not glue.
☐
Pull sides together, trapping F15 in slots in
fuselages sides, align and tape with low tack
masking tape. Tack glue F15, but do not glue
ends of fuselage sides at this time.
☐
Assembly F16 by bonding F16a to F16b.
☐
Fit F16 to bottom of fuselage, engaging tabs
to slots in fuselage side, and tab at bottom of
F15.
☐
Spread fuselage sides slightly and insert F17
into frame just forward of F15. F17 should
tab into F16 bottom and snap into slots in
fuselage sides.
Do not glue.
Build Instructions
SkyScout 480
- Build Instructions © 2010 Stevens AeroModel, all rights reserved.
!
Page 29
F14
F14
F10
F12
F15
F15
F16a
F16b
F15
F16
F17
F15
F16
