Fuselage Cont.
☐
In the same manner, fit F18 within frame
between F17 and F3, tabbing into F16
bottom.
Do not glue.
☐
Fit F19 to top rear of fuselage, just behind
F15. Check alignment of fuselage, ensuring
there is no twist, then bond all mating
surfaces between sides, bottom, formers and
F19.
☐
Fit and bond F20 spine across the top of
formers F3, F18, F17, and F15.
☐
Tack glue ply motor mount F21 to the front of
F0, with etching facing forward.
☐
Fit ply parts F22 to each side of F0 and F21.
Bond all mating surfaces with medium CA,
building up a fillet of glue along all seams.
☐
Fit and bond F23 to top of motor mount
assembly with medium CA.
Build Instructions
SkyScout 480
- Build Instructions © 2010 Stevens AeroModel, all rights reserved.
!
Page 30
F18
F3
F17
F19
F15
F20
F3
F18
F21
Front
F0
F22
F22
F21
F0
F23
F16
