Wing Construction Cont.
☐
Fit W18 across rib W4 and ribs W5, flush
against the front spar W1. Bond with medium
CA. Create fillets of glue along all inside
mating surface for extra strength.
☐
In the same manner as W18 instruction, fit
and bond hardwood part W19 to assembly.
☐
Fit and bond part W20 spanning rib W4 and
ribs W5, and against part W19.
☐ ☐
Fit and bond hardwood parts W21,
spanning ribs W13 and W14, and against
the spars. The holes in W21 should be
on the outboard end of the part and
closest to the spar. Build up a fillet of
glue around all mating surfaces.
☐ ☐
Fit W22 between ribs W5 and W10. The
hole in W22 should fall in line with the
holes in the ribs.
Ensure arrows on the
diagonal braces point up and toward the
front spar.
DO NOT GLUE!
☐ ☐
In the same way, fit W23 between ribs
W10 and W13.
DO NOT GLUE!
Build Instructions
SkyScout 480
- Build Instructions © 2010 Stevens AeroModel, all rights reserved.
!
Page 19
W18
W5
W4
W5
Bottom View
W1
W19
Bottom View
Rear Spar W2
Bottom View
W19
W20
W4
W5
W5
Bottom View
W21
W13
W14
Wing Tip
W22
W5
W10
W23
W10
W13
W5
W5
