Wing Construction Cont.
☐ ☐
Fit W24 between rib W14 and rib W17.
DO NOT GLUE!
☐
Repeat previous
☐
☐
steps for opposite side
of wing assembly.
☐
Cut both paper tubes to 17 in. long.
☐
Beginning at rib W17, slide tubes through the
holes in the ribs and diagonals.
☐
When in position, the tubes should extend
about 1/8 in. beyond rib W17.
☐
The other end of the tubes should extend
about 1/2 in. beyond ribs W5.
☐
Square the wing on a flat surface and check
the alignment of all parts.
Build Instructions
SkyScout 480
- Build Instructions © 2010 Stevens AeroModel, all rights reserved.
!
Page 20
W24
W14
W17
W17
W17
1/8 in.
W5
W5
1/2 in.
