Wing Construction Cont.
☐
Lock the wing square by bonding the
diagonals to the adjoining ribs, partial ribs,
and spars with medium CA.
☐
Bond the paper tubes in place with a small
drop of medium CA where they contact each
rib and diagonal. brace.
☐
Fit plywood servo pockets parts W25 in slots
in rib W17 and rear spar. Bond with medium
CA. Repeat for opposite wing half.
☐
Fit balsa servo pocket parts W26 over W25
and flush against rib and spar. Bond with thin
CA. Repeat for opposite wing half.
☐
On both
left
and
right
of wing center fit and
bond partial rib W27 to front and rear spars
(left W27 not shown).
☐
On both
left
and
right
of wing center fit and
bond partial rib W28 (
left
W28 not shown).
Build Instructions
SkyScout 480
- Build Instructions © 2010 Stevens AeroModel, all rights reserved.
!
Page 21
W25
W17
Bottom View
W25
W26
Bottom View
W27
W28
