Fuselage Cont.
☐
Mark and trim stringers at F3. Bond in place
with thin CA.
☐
When all stringers are in place, lightly sand
stringers to remove any high spots.
☐
Create hatch catch by bonding ply Ca and Cb
together with medium CA.
☐
Fit catch into slots on the front of F3, within
the hatch opening on the bottom of fuselage.
☐
Using medium CA, bond one Neo. Magnet
into the recess in the catch.
☐
Begin building hatch by bonding H2 rails to
H1.
Ensuring rails and etching on H1 are on
the same side.
Build Instructions
SkyScout 480
- Build Instructions © 2010 Stevens AeroModel, all rights reserved.
!
Page 32
Ca
Cb
F3
H2
H1
Etching
Bottom View
Bottom View
Neo. Magnet
