Stentofon A100K10788 Installation & Configuration Manual Download

Page: 23 / 40

IP Master Station Installation & Configuration

A100K10788

7. Click

Save settings

to store the data

The station will now try to contact the TFTP server. If the connection

cannot be established or the file

tftp_test.txt

is missing from the folder, the

message

TFTP_CONN_ERROR

is displayed. If the response is

TFTP_

CONN_OK

the settings are saved, and the

Upgrade

button will appear.

Click the

Upgrade

button to upgrade the software of the IP station. The

upgrade procedure takes about 3 minutes. The transfer process can be

monitored by selecting the

Log viewer

tab in the TFTP server program.

4.3

Upgrade Via AlphaCom XE

Start the TFTP server and browse to the folder where the software file is

located.
Log on to the AlphaCom webserver AlphaWeb:

1. Select

System Upgrade

IP Station Upgrade

2. Enter the IP address of the

TFTP server

, the filename of the

software

Image

and its

CRC

checksum and click

Save

3. Select the station to upgrade and click

Update Station List

4. Click

Start Upgrade Process

The AlphaCom XE exchange will tell the station to contact the TFTP

server, download the software image and carry out the upgrade.
A short status description of the process will be displayed in the Upgrade

status column. The message

IPST:ERROR

indicates that there is no

connection to the TFTP server, or that the

tftp_test.txt

file is missing from

the folder The transfer process can be monitored by selecting the

Log

viewer

tab in the TFTP server program.

Windows Explorer may be set to hide known file extensions so the file may appear

without the

.bin

extension. The name of the software image file has to be entered

with the extension

.bin

During an upgrade, the IP station switch will not be VLAN aware. Make sure the

IP station can reach the TFTP server from the native VLAN.

During an upgrade of the IP station, 802.1X will not be running. Thus if 802.1X

reauthentication is enabled and is performed during the upgrade, the IP station

may lose contact with the TFTP server (depending on the configuration when

802.1X authentication fails). If the IP station loses contact with the TFTP server,
it will not be upgraded.

Summary of Contents for A100K10788









































Search results

Summary of Contents for A100K10788

Reviews:

Related manuals for A100K10788

Brands by name

Popular brands

Stentofon A100K10788, Installation & Configuration Manual

Search results

Summary of Contents for A100K10788

Reviews:

Related manuals for A100K10788

Brands by name

Popular brands