Stentofon A100K10788 Installation & Configuration Manual Download

Page: 38 / 40

A100K10788

IP Master Station Installation & Configuration

E.5 IP Dual Display Station

Dimensions: (W x H x D)

72 x 270 x 139 mm / 2.8 x 10.6 x 5.5 inches

Weight

0.4 kg

Temperature range

0˚C - 55˚C / 32˚F - 131˚F

Max SPL

85 dB at 1m

Loudspeaker Impedance

8 ohm

Frequency Range

300 - 7000 Hz

Connector

1 x RJ45 (Ethernet) 10/100 Mbps

Direct access display

10 lines, 5-8 characters graphic

Information display

4 lines, 20 characters graphic

Power consumption

Power over Ethernet, IEEE 802.3 a-f, Class 0, Idle 4W, max. 8W

IP protocols

IP v4 - TCP - UDP - HTTPS – TFTP - RTP - RTCP -DHCP - SNMP - DiffServ - TOS – STENTOFON CCoIP®

LAN protocols

Power over Ethernet (IEEE 802.3 a-f), VLAN(IEEE 802.1pq), Network Access Control (IEEE 802.1x), STP (IEEE

802.1d), RSTP (IEEE 802.1d-2004)

Audio technology

Wideband 200 Hz - 7 kHz (G.722)

Telephony 3.4kHz (G.711)

Active noise filtering

Acoustic echo cancellation

Open duplex

Adaptive jitter filter

Handset and volume override

Management and

operation

DuHTTPS (Web configuration)

DHCP and static IP

Remote automatic software upgrade

Centralized monitoring

Status LED

E.6 IP Master Station Kit

Dimensions (WxHxD)

88 x 152 x 20 mm (PCB)

Weight

250 g (PCB)

Temperature

0˚C - 55˚C

Power

Power over Ethernet, IEEE 802.3 a-f, Class 0, Local 19-27 VDC power, Idle 4 W, max. 13 W (ext. amplifier),

6W power out to external units

Connectors

Ethernet: 2 x RJ45 10/100 Mbit/sec

Handset: R J11

Headset: R J11

Microphone: 3-pin plug (Electret, dynamic)

Loudspeaker: Plugable screw terminal (1.5 W, 8 Ohm)

24 VDC in, 1 relay out: 6-pin plugable screw terminal

LED, 3 inputs: 6-pin plugable screw terminal

Gooseneck microphone: 3-pin IDC (Electret) Display: 20-pin ZIF

Keyboard: 18-pin ZIF + solder holes (Digits 0-9 + M and C , 10 DAK, 4 softkeys, volume control, backlit control)

Audio out: 6-pin IDC (0 dB / 600 Ohm, 13 V power out)

I2C bus: 6-pin mini (DAK modules, relay modules, +3.3 V power output)

IP protocols

IP v4 - TCP - UDP - HTTPS – TFTP - RTP - RTCP -DHCP - SNMP - DiffServ - TOS – STENTOFON CCoIP®

LAN protocols

Power over Ethernet (IEEE 802.3 a-f), VLAN (IEEE 802.1pq), Network Access Control (IEEE 802.1x), STP

(IEEE 802.1d), RSTP (IEEE 802.1d-2004)

Audio technology

Wideband 200 Hz - 7 kHz (G.722)

Telephony 3.4kHz (G.711)

Active noise filtering

Acoustic echo cancellation

Open duplex

Adaptive jitter filter

Volume override

Management and

operation

HTTPS (Web configuration)

DHCP and static IP

Remote automatic software upgrade

Centralized monitoring

Status LED

Advanced features

Dual port Ethernet switch

Support for external PA amplifier

Support for external smart PA amplifier with switching and status

Support for external display modules

Support for external I/O modules

Summary of Contents for A100K10788









































Search results

Summary of Contents for A100K10788

Reviews:

Related manuals for A100K10788

Brands by name

Popular brands

Stentofon A100K10788, Installation & Configuration Manual

Search results

Summary of Contents for A100K10788

Reviews:

Related manuals for A100K10788

Brands by name

Popular brands