12
A100K10788
IP Master Station Installation & Configuration
2.6
Gooseneck Microphone for IP Flush Master
● item no. 1008097500
To install the Gooseneck Microphone:
1. Remove the cover plug from the opening for the microphone on the
front panel.
2. Thread the microphone cable through the opening, the lock washer
and nut.
3. Tighten the nut on the microphone’s threaded stud.
4. Insert the microphone’s IDC socket into the upper two pins of the
3-pin header (
J7
) located at the lower left side of the station. The
signal wire (
white
) should be on the top pin while the ground wire
(
green
) should be on the bottom pin.
5. Slide the
S1
switch (bottom back of station) to
EXT
to activate the
external microphone function.
Figure 10
Installing the Gooseneck Microphone for Flush Master
J7
3-pin header
INT
S1
4
3
2
1
5
Gooseneck Microphone
Cover Plug
Nut
IDC Socket
Slide Switch
IP
F
lus
h
M
ast
er
S
tati
on
Microphone Cable
