30
31
06.11.2020
The terms "device" or "product" are used in the warnings
and instructions to refer to WIFI WEATHER STATION.
2.1. ELECTRICAL SAFETY
CAUTION: The rules of „electrical safety“ should be followed
when the device is powered from the mains.
a)
The plug must fit the socket. Do not modify the
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b)
Do not touch the device with wet or damp hands.
c)
Use the cable only for its designated use. Never use it
to carry the device or to pull the plug out of a socket.
Keep the cable away from heat sources, oil, sharp
edges or moving parts. Damaged or tangled cables
increase the risk of electric shock.
d)
Do not use the device if the power cord is damaged
or shows obvious signs of wear. A damaged power
cord should be replaced by a qualified electrician or
the manufacturer‘s service centre.
e)
To avoid electric shock, do not immerse the cord,
plug or device in water or other liquids. Do not use
the device on wet surfaces.
f)
Do not use in very humid environments or in the
direct vicinity of water tanks.
U S E R M A N U A L
Product name
WIFI WEATHER
STATION
Model
SBS-WS-400
Power supply
DC 5V1A
Temperature
Measurement
range (outdoor)
[°C]
-40÷60
Measurement
range (indoor)
[°C]
0÷50
Measurement
accuracy [° C]
±1
Humidity
Measurement
range [%]
10÷99
Measurement
resolution [%]
1
Measurement
accuracy [%]
±5
Rainfall
Measurement
range [mm]
0~9999
Measurement
resolution [mm]
0,3 (if the volume of
rain <1000mm)
1 (if the volume of
rain >1000mm)
Measurement
accuracy [%]
±10
Wind speed
Messbereich [m/s]
0÷50
Atmospheric
pressure
Measurement
range [hPa]
300-1100
Measurement
accuracy [hPa]
±3 (700-1100)
Alarm duration [s]
120
Data transmission range [m]
100
Transmission frequency [mHz]
868,3
IP protection
class
Transmitter
IPX0
Sender
IPX4
Battery type
Transmitter
indoor
3xAA
Transmitter
outdoor
2xAA
Dimensions
[mm]
Receiver
175x145
Transmitter
380x150x170
TECHNICAL DATA
2.2. SAFETY IN THE WORKPLACE
a)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
b)
Regularly inspect the condition of the safety labels. If
the labels are illegible, they must be replaced.
c)
Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
d)
Keep packaging elements and small assembly parts
in a place not available to children.
e)
Keep the device away from children and animals.
2.3. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The device can be handled only by physically fit
persons who are capable of handling it, properly
trained, familiar with this manual and trained within
the scope of occupational health and safety.
c)
Do not wear loose clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in
moving parts.
d)
Remove all adjusting tools or spanners before
turning the device on. A tool or spanner left in the
revolving part of the device may cause injury.
e)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.4. SAFE DEVICE USE
a)
Do not overload the device. Use the appropriate
tools for the given task. A correctly-selected device
will perform the task for which it was designed better
and in a safer manner.
b)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
c)
Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
d)
Keep the device out of the reach of children.
e)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
f)
Clean the device regularly to prevent stubborn grime
from accumulating.
g)
The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
h)
Keep the device away from sources of fire and heat.
i)
Do not overload the device.
j)
Keep batteries out of reach of children when not in
use.
k)
Before use, make sure that the wind turbine and
the rotor are not blocked in any way, which would
disturb the measurement results.
l)
The external transmitter should be mounted in
the open air in a place where it can be exposed to
weather conditions. Mounting close to canopies,
walls or trees may result in disturbing the
measurement results.
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed and
manufactured in accordance with strict technical guidelines,
using state-of-the-art technologies and components.
Additionally, it is produced in compliance with the most
stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. The device
is designed to reduce noise emission risks to a minimum,
taking into account technological progress and noise
reduction opportunities.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
ATTENTION! Electric shock warning! (Use this
warning when the unit is powered from the
mains).
ATTENTION! Rotating parts, entanglement
hazard!
PLEASE NOTE!
Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual machine.
The original operation manual is in German. Other
language versions are translations from German.
ATTENTION!
Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in an electric shock, fire
and/or serious injury or even death.
2. USAGE SAFETY
3. USE GUIDELINES
The device is intended for meteorological measurements,
incl. temperatures, rainfall, air humidity, wind speed, etc.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
3.1.1. TRANSMITTER
1.
Wind direction indicator
2.
Wind speed meter
3.
Light sensor
4.
Humidity / temperature meter
5.
Precipitation level meter
6.
Level
7.
Solar panel
8.
Pin "U"
9.
Battery compartment
10. [RESET] button
11. LED diode
ATTENTION!
Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
ATTENTION!
This product‘s view can be found on
the last pages of the operating instructions (pp. 212-
213.).
3.1.2. RECEIVER
1.
Time panel
2.
Indoor temperature panel
3.
Indoor humidity panel
4.
Barometric pressure panel
5.
Barometric pressure graph
6.
Weather forecast icon
7.
Information display panel
8.
RF icon
9.
Alarm icon
10. Memory status
11. Wind direction panel
12. Rainfall panel
13. Wind speed panel
14. Wind chill temperature, dew point, heat index
15. Outdoor humidity panel
16. Outdoor temperature panel
17. UV index
18. Light panel
19. Date
20. Wi-Fi icon
3.1.3. FUNCTION BUTTONS PANEL
EN
EN
