Steca coolcept StecaGrid 1500, Installation And Operating Instruction

Page: 34 / 94

①
②
Fig. 11: Position of the sticker for covering the Protection Class II
symbol
Completely cover the Protection class II symbol using the
small sticker provided, as shown in Fig. 11.
NOTICE!
How to remove the inverter from the mounting plate
is described under
Ä
Chapter 4.9 ‘Switch on DC’
on page 47.
1. Grasp inverter on the grip recesses
①
(coolcept) or on the
perimeter edge (coolcept-x), fit it onto the mounting plate
➊
so that it is centred
②
and lightly press it on (see the example
in the fig. on the left).
2. Lower the inverter
③
until the securing sheet metal element
of the mounting plate audibly locks in place. In this process,
the hooks on the rear of the inverter must be guided above
the catches on the mounting plate.
3. The inverter must now be firmly seated on the mounting
plate and it can no longer be lifted (upwards).
Attaching the inverter on
the mounting plate
EN
747,431 | Z09.2 | 18/02/2016 34