Steca coolcept StecaGrid 1500, Installation And Operating Instruction

Page: 8 / 94

2.3 Scope of delivery
n
Inverter
①
, type coolcept (plastic housing) or coolcept-x
(stainless steel housing, IP65)
n
Mounting plate
②
for type coolcept or coolcept-x
n AC plug
③
n
1 pair SUNCLIX plug-in connectors
④
n
3 sealing caps (for RJ45 socket; only coolcept-x)
⑤
n
Brief installation and operating instructions
⑥
①
②
③
④
⑤
⑥
2.4 Intended use
n
The inverter must only be used in grid-coupled photovoltaic
systems. The inverter is suitable for all PV generator with
connections that do not need to be grounded.
n
PV generator must be used that have an IEC 61730 class A
rating because the inverter does not have electrical isolation.
n
If the maximum AC operating voltage is higher than the
maximum system voltage of the photovoltaic generator, then
PV generator must be used that have a maximum system
voltage that is higher than the AC grid voltage.
Notice
An overview of suitable PV generators is available at
www.stecasolar.com
Þ
PV GRID CONNECTED
Þ
Service and support.
EN
747,431 | Z09.2 | 18/02/2016 8