Steca coolcept StecaGrid 1500, Installation And Operating Instruction

Page: 43 / 94

NOTICE!
The following items are only displayed when the use
of a reactive power characteristic curve is prescribed
for the country currently selected in the Country item:
–
Mode
: Type of characteristic curve
Select one of the following types:
-
cos phi = 1
- Q(P)
- Q(U) linear
-
Q(U) hysteresis
–
Loading defaults
1) : A default characteristic
curve can be selected here.
–
Node 1
1)
No. of nodes
1) The nodes provide for free
programming of a characteristic curve.
–
Node 2
1)
–
Node n
1) 2)
–
Display char. curve
1) : Not indicated with mode cos phi = 1.
2) : Is only displayed when
no. of nodes
has been
set to a value > 2.
1. Press
SET
to call up the item.
2.
Press rs to select a type of reactive power characteristic
curve.
3. Press
SET
.
ð
The reactive power characteristic curve type is adopted.
4. Press
ESC
.
✓
The check list is shown.
Reactive power
EN
747,431 | Z09.2 | 18/02/2016 43