Steca coolcept StecaGrid 1500, Installation And Operating Instruction

Page: 33 / 94

4.2 Mounting the inverter
u Screw the mounting plate to the mounting surface using 4
screws:
n
Use screws (and dowels etc.) appropriate for the weight of the
inverter.
n
The mounting plate must lie flat on the mounting surface and
the metal strips at the sides must point forwards (Fig. left).
n
Install the mounting plate vertically with the retaining plate
①
at the top (example in Fig. left).
NOTICE!
With coolcept-x, you can secure the inverter with a
padlock against theft or unauthorized removal. The
padlock is inserted in a shackle which will lock into
the retaining plate during mounting. Now, it is no
longer possible to unlock the retaining plate.
NOTICE!
For more information on determining the optimum
position for the mounting plate, refer to the Brief
Installation Instructions comprised in the delivery, and
to the Appendix under Mounting.
Notice
When the inverter is used in Australia, the national
regulations do not permit the Protection class II
symbol to be displayed on the type plate.
Fastening the mounting
plate
For Australia only: Cover
the Protection class II
symbol on the type plate.
EN
747,431 | Z09.2 | 18/02/2016 33