Notice
The display reacts slower at very low temperatures. In
particular, this can apply for coolcept-xdevices if they
are used outdoors.
3.3.2 Information
The information shown on the display is described below using
illustrative examples.
The status display shows the following values:
①
Measurement name
②
Measurement with units
③
Date is displayed alternatingly with IP address
④
Cover the Non-confirmed event messages; more information on
⑤
Animated symbol Connect symbol with 2
‑
digit inverter address;
indicates data traffic on the RS485 bus.
⑥
Cover the Power reduction (Derating)
⑦
Cover the Fixed voltage mode activated
⑧
Time
⑨
IP address of the device when a network connection has been
established, display alternates with
③
–
⑦
The following applies to the status display:
n
The measurements shown in the status display are defined
under
Settings
▶
Meas. values
. Some measurements are
always displayed (default setting).
n
Current values are not displayed at night (solar irradiation too
low; example in Fig. left).
n
The
CO2 saving
shown in the status display are calculated
using the savings factor 508 g/kWh .
Daily, monthly and annual yields can be displayed numerically in a
list.
①
Yield period (day/month/year)
②
Individual yields with period and value (1 per row)
The yield periods contain the following numbers of individual
entries:
n
Day yield: last 31 days
1)
n
Monthly yield: last 13 months
1)
n
Annual yield: last 30 years
1)
1)
A yield value of 0 is shown when the inverter was not yet installed
at that time.
Status display
3
4
22
7
8
9
5
6
1
F
Numeric yield (day,
month, year)
EN
747,431 | Z09.2 | 18/02/2016
15
Summary of Contents for coolcept StecaGrid 1500
