Star Micronics WinType 4000, Technical Manual

Page: 77 / 180

– 73 –
MAINTENANCE GUIDE
Not possible
1.8.3 List of Non-volatile Codes
LCD Display (shown on the top row of the display) Data [Preset Value]
Function Details
0
CONFIGURATION 0 ~ F (16 levels) [Preset Value ____ ]
Sets the configuration. A value from 0 to F (hexadecimal number) is
entered as a binary number and represents b3,
b2, b1 or b0. The information for each bit is
shown below.
b0: Paper Size Specifications
(0: For domestic use, 1: For overseas use)
b1, b2, b3: NA (010: Fixed)
1
RESOLUTION 0 ~ 8 (9 levels) [Preset Value 1]
Sets the resolution. 1: 300dpi
2
LD_POWER 0 ~ 4 (5 levels) [Preset Value 2]
Adjusts the output of the laser diode. 0 indicates the lowest output for the laser
diode and the faintest print density. 4 indicates
the highest output for the laser diode and the
darkest print density.
4
TR PLUS CONTROL 0 ~ F (16 levels) [Preset Value 0]
Adjusts the TR output. 0 indicates the auto mode.
REG. PROSESS 0 ~ F (16 levels) [Preset Value 8]
5
0 indicates that the minimum amount of blank
space will be left at the top and bottom of the
page and F indicates that the maximum
amount of blank space will be left at the top
and bottom of the page.
• Changes in 0.56 mm increments.
7
E2 JAM DETAIL 1 ~ 3 (3 levels) [Preset Value ____ ]
Sets the timing for the JAM. 1: Initial Reg On
2: Very fast paper jam
3: Very slow paper jam
Not possible
Can the
setting be
changed ?
Possible/ Not
Possible
Non-
volatile
Code
Not possible
Not possible
Not possible
Possible
Adjusts the registration marks at
the top and bottom of the page.