Chapter 5. Troubleshooting
STACK ST8302 and ST8360 Video-Logger System
64
User Guide
Symptom Possible
Cause
Remedy
Notes
ON/OFF [INC]
Switch faulty
Replace Video
Controller
Disconnect the
Video Controller
and short the leads
together. If the
Video Display
changes replace
Video Controller
ON/OFF [INC]
Switch does not
work
Faulty switch wiring
Check switch wiring
for correct continuity
Check continuity
less than 1.0 Ohm
between:
15w conn pin B &
8w Switchcraft p4
Also
15w conn pin E &
8w Switchcraft p8
Lap marker receiver
lead faulty
Check lap marker
wiring
Disconnect receiver
and press lap switch
4
Lap time is not
Displayed
automatically
(Automatic
receiver is fitted)
Lap marker receiver
faulty
Replace lap marker
receiver
If Video Display
changes, replace
receiver after
checking its wiring
Bulb has burnt out
Replace bulb
Swap with the Shift
Light to confirm
burnt-out bulb. If
not burnt out, check
wiring
Alarm Light dead
when an alarm is
Displayed
Faulty wiring to light
Check continuity of
wiring
Check continuity
less than 1.0 Ohm
between:
19w conn Pin G &
Red AL wire.
Also
19w conn pin N &
Yellow AL wire
