STACK ST8302 and ST8360 Video-Logger System
Chapter 4. Installation
User Guide
53
Oil and Fuel Pressure Sensors
Consider the following when choosing a location for the pressure sensors:
•
Avoid mounting them near sources of intense heat
•
Do not position them closer than 75mm (3 inches) to ignition
leads, the distributor or engine oil.
•
If possible, do not mount the sensor on the engine block, as engine
vibrations may shorten its life expectancy
1.
Use suitable pressure hoses and fittings to attach the sensor at the
appropriate monitoring point
2.
Connect the wiring harness to the sensor using the Sure-Seal
connector
Diagram 19 – Oil and Fuel Pressure sensor
