Chapter 3. Configuration
STACK ST8302 and ST8360 Video-Logger System
40
User Guide
Throttle Pedal
Using the Video Controller, hold down the DEC button and press INC to
enter the Throttle Calibration submenu (see p. 33).
The figures displayed in this setting show both the real-time values from
the throttle sensor and the value stored.
This setting stores two values, one at 0% (when the driver’s foot is off
the throttle) and the other at 100% (when the throttle pedal is fully
depressed).
Start with no pressure on the pedal and press NEXT on the Video
Controller to store the 0% value. Then fully depress the pedal and press
NEXT again to store the 100% value.
Finally, press INC to store the new values or DEC to ignore them.
Gear Number
The ‘Max’ versions of the Video-Logger system will estimate your
current gear based on a given wheel and engine speed. To do this, it
needs to know the wheel speed for each gear when the engine speed is at
5,000 RPM.
The Gear number is then based on the ratio:
Engine Speed
Wheel
Speed
Press DEC+INC to cal
Throttle Pedal
EDIT GEAR
Press DEC+INC to cal
