STACK ST8302 and ST8360 Video-Logger System
Chapter 4. Installation
User Guide
59
Battery Connection
The ST8360 Expansion system derives power from the vehicle battery via
the Stack display device. Refer to its manual for details.
The ST8302 Standalone system needs to be connected directly to the
vehicle battery by the two cables labelled ‘B+’ and ‘B-‘ in the sensor
harness:
•
Connect the
black
‘B-’ cable from the harness to the battery’s
negative terminal. Do not connect it to a chassis ground.
•
Connect the
red
‘B+’ cable from the harness to a fused supply
from the battery’s
positive
terminal. The fuse rating for this line
should be no greater than 1 A and
should only become live
when you switch on the vehicle ignition
.
