STACK ST8302 and ST8360 Video-Logger System
Chapter 4. Installation
User Guide
45
The V/VS Module
If you have a ‘Max’ system capable of measuring G-forces, the V/VS
Module must lie horizontally in the vehicle, parallel to the ground with
the Stack label uppermost.
The connectors on the module should be orientated towards the front of
the vehicle.
Ensure that the module is fitted securely so that it will not work itself
loose when the vehicle is being driven.
Diagram 13 – Alignment of V/VS Module within vehicle
The Lateral and Longitudinal-G sensors are internal to the V/VS
module and require that it is fitted and aligned correctly, as described
above. Any small errors can be adjusted in the Lat-G and Long-G
offset configuration settings (see Chapter 3 – Configuration).
