SETTING UP THE SSK
513
WITH QUICK SETUP
The SSK
513
provides you with a Quick Setup utility that allows you to set or change your Flow Units, Totalizer Units, Full Scale
Flow and Low Flow Cutoff settings. To open the Quick Setup, select
Quick Setup
from the
Start Menu
.
Quick Setup
Flow Unit
[GPM]
Flow Unit lets you set the unit of measure for the flow rate and full scale flow.
To change the Flow Unit value, follow these steps from the
Quick Setup
menu.
1. Select
Flow Unit
to view the
Flow Unit
display.
2. Press
[
]
or
[
]
to position the arrow next to one of the following Flow Units:
Code
Flow Unit
Code
Flow Unit
LPS
Liter/Second
GPM
Gallons/Min
LPM
Liter/Minute
GPH
Gallons/Hour
LPH
Liter/Hour
MGD
MegaGallon/Day
M
3
S
Cubic Meter/Sec
IGS
UKG/Sec
M
3
M
Cubic Meter/Min
IGM
UKG/Min
M
3
H
Cubic Meter/Hour
IGH
UKG/Hour
F
3
S
Cubic Feet/Sec
LbM
Pound/Min
F
3
M
Cubic Feet/Min
OPM
Ounce/Min
F
3
H
Cubic Feet/Hour
BPM
Barrel/Min
GPS
Gallons/Sec
—
—
3. Press
[E]
to save the Flow Units setting.
Totalizer Unit
[USG]
Totalizer Unit establishes the units of measure for the totalizers.
To change the Totalizer Unit value, follow these steps from the
Totalizer Unit
display.
1. Press
[
]
or
[
]
to position the arrow next to one of the following Totalizer Units:
Code
Totalizer Unit
Code
Totalizer Unit
L
Liters
UKG
Imperial Gallons
HL
HectoLiters
Lb
Pounds
M
3
Cubic Meters
Oz
Fluid Ounces
CFt
Cubic Feet
Aft
Acre Feet
USG
U.S. Gallons
BBL
Barrel
MG
MegaGallons
—
—
2. Press
[E]
to save the Totalizer Units setting.
SSK
513
Electromagnetic Flow Meter
Page 26
March 2014