PROGRAMMING THE SSK
513
The SSK
513
amplifier comes preprogrammed from the factory. Typically, you will not need to do any additional programming.
However, to take advantage of special features, you can program the meter for your specific needs. If you will be
programming the meter, familiarize yourself with the M2000 Function Buttons and follow the procedures outlined below.
Displays
There are two types of displays on the M2000:
• Menu
Selection
• Numeric
Entry
Menu Selection Display
Menu selection displays will appear in the following format:
DISPLAY TITLE
>Menu Selection 1
Menu Selection 2
DIRECTIONS LINE
START MENU
>Exit this Menu
Main Menu
MORE:
,
ENTER:>
Display format
Example menu
The top line shows the title of the display screen. Below that are two visible menu selections. The bottom line provides
directions for user input.
Typically, a menu contains more options than will fit in the two menu selection lines. Press the
[
]
and
[
]
buttons to scroll the
display text up and down one line at a time. When the arrow is pointed to your desired menu option, press
[E]
to select the
item and open its display.
Numeric Entry Display
Numeric entry displays will appear in the following format:
DISPLAY TITLE
Description Line
Numeric Value
DIRECTIONS LINE
LOW FLOW CUTOFF
% of 300.000 GPM
2.00%
CHG: +,- NEXT:E
Display format
Example numeric entry display
The top line shows the title of the display screen. The second line is a description of the value. The third line shows the
current value. The bottom line provides directions for user input.
Installation & Operation Manual
Page 21
March 2014