Communication: Port Settings
Parity
[Even]
The following Parities are supported
• Even
• Odd
• None
To change the parity, follow these steps from the
Port A Settings
menu:
1. Select
Parity
to view the
Parity
display.
2. Select one of the following:
None
,
Even
or
Odd
.
3. Press
[E]
to save the option and to return to the
Port A Settings
menu.
Stop Bits
[1 Stop Bit]
The Stop Bits parameter configures the port stop bits. The following stop bits are supported:
• 1 Stop Bit
• 2 Stop Bits
To change the stop bits, follow these steps from the
Port A Settings
menu:
1. Select
Stop Bits
to view the
Stop Bits
display.
2. Select one of the following:
1 Stop Bit
, or
2 Stop Bits
.
3. Press
[E]
to save the option and to return to the
Port A Settings
menu.
Communication: Port B
Port Address
[1]
An additional communication port, known as Port B, is used to offer enhanced communications with the
meter. This port is located on the 11-pin terminal of the PCB. Enhanced protocols like Hart, Profibus DP
or Modbus RTU over RS485 are available. In addition, this communication port has similar configurable
properties as port A. Refer to the following IOMs for additional information regarding the enhanced
communication capabilities of the SSK
513.
.
• See IOM-114-XX-EN for details on HART® communication protocol.
• See IOM-115-XX-EN for details on PROFIBUS DP communication protocol.
• See IOM-116-XX-EN for details on MODBUS RTU communication protocol.
Installation & Operation Manual
Page 41
March 2014
S
S
S
