SportsPlay Quick Ship 3 Modified, Installation Instructions Manual

Page: 55 / 140

March 11, 2014 8
922-120-3 CORKSCREW 3’ DECK
INSTALLATION INSTRUCTION
INSTALLATION STEPS CONTINUED
__8) Install the Corkscrew climber: Place the Corkscrew Climber
over the stub on the Arch Wall and secure it with the 5/16” x 1 ¾”
Button Head Bolt (9), 5/16” Button Head Nut (10), and 5/16” Lock
Washer (11). (See detail C)
__9) Once the entire playground has been installed and you have
verified that the entire playground is level you can
add the
concrete to the footing holes . Be sure to use concrete with a
minimum 2,500 psi and mix the concrete per the manufacturer’s
directions before you pour it into the footing hole. Once the
footing has been filled with concrete you should rope of the area for
a minimum of 48 hours to allow the concrete set properly.
__10) Once the concrete has set , back fill dirt over the footing
holes; inspect the area and components for tools, hazardous debris,
and sharp edges. Verify all components are installed and all
hardware is tight and then install the safety surfacing.
__11) Inspect the components for sharp edges and if necessary
file them down and apply touch up paint.