SportsPlay Quick Ship 3 Modified Installation Instructions Manual Download Page 102 | Manualshive

Page: 102 / 140

background image

April 30, 2014

5

912-275 PYRAMID ROOF

INSTALLATION INSTRUCTION

INSTALLATION STEPS CONTINUED

__6)

Drill holes into the Pyramid Roof:

Rotate the Pyramid Roof

to allow access to the marks you made in the previous step. Drill
each of the eight marks with the 3/4” drill bit. Install a Zip Toggler
(3) into each of the holes. Now you can rotate the pyramid Roof
back into position.

__7)

Attach the pyramid Roof to the Roof Brackets:

Now that

you have the Pyramid Roof lined back up with the Roof Brackets.
Install the 3/8” x 2” Button Head Bolt (4) with a 3/8” Flat Washer
(5) in on it through the Roof Bracket and into the Pyramid Roof.

Do not tighten these until you have centered the roof with the deck.

(See detail B)

__8)

Secure the Roof Brackets to the posts:

Now that you have

everything attached and centered over the deck, you can install a
Self Tapping Screw (6) through the Roof Bracket and into the post.
Do this for each of the Roof Brackets. (See detail C)

__9)

Inspect the components:

for sharp edges and if necessary file

them down and apply touch up paint.

«
...
100
101
102
103
104
...
»

Summary of Contents for Quick Ship 3 Modified













































































































































Reviews:

No comments

Related manuals for Quick Ship 3 Modified

Brand: Kapriol Pages: 32

Brand: Gomaco Pages: 30

Brand: Panduit Pages: 4

Brand: Pottinger Pages: 39

Brand: Tayplay Pages: 8

Brand: Zhermack Pages: 200

Brand: Tegam Pages: 27

Brand: Crewsaver Pages: 36

Brand: Essex Electronics Pages: 30

Brand: Mark Pages: 32

Brand: ADJ Pages: 20

Brand: EIDER Pages: 48

Brand: Major tech Pages: 4

Zone Commander ZM3302

Brand: Brillion Pages: 54

Brand: American DJ Pages: 10

Brand: Petzl Pages: 17

Brand: Priefert Pages: 10

Zombies 12xx Series

Brand: Quantec Pages: 145

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands