SportsPlay Quick Ship 3 Modified, Installation Instructions Manual

Page: 83 / 140

May 1, 2014 4
922-112 BUBBLE WINDOW
INSTALLATION INSTRUCTION
BEFORE YOU BEGIN
In addition to the components on the packing list you will need a
drill with a #7 drill bit, tape measure, and a dry erase marker.
INSTALLATION STEPS
__1) Review all instructions before beginning:
__2) Unpack, organize, and identify all components: Be sure to
place all painted components on a protective surface (cardboard,
cloth, etc…) to prevent damage.
__3) Locate placement of the Bubble Window: See top down
view of your instruction booklet.
__4) Connect Four-Hole brackets to posts: First you will need to
fit the Four-Hole Brackets (2) onto the Bubble Window (1). The
top of the Bubble window should be 38” from the surface of the
deck to the top of the Bubble Window. Once you have the top
Bubble Window at the correct height, mark the locations for the
Four-Hole Brackets.
TIP: It’s easier to install the self-tapping
screws if you pre drill the holes in the post with a #7 drill bit.
Install the Four Hole Attachment Bracket to the post with the 3/8”
threaded hole facing the ground and the Attachment Bracket Gasket
between the post and the Four Hole Attachment Bracket. (See
detail A)

CRITICAL MEASUREMENT IT IS EXTREMILY
IMPORTANT THAT YOU MAINTAIN A MAXIMUM
OF 3 1/2” DISTANCE BETWEEN THE BOTTOM, OR
SIDES OF THE BUBBLE WINDOW AND THE
NEAREST EDGE OF THE DECK OR POSTS.