manualshive.com logo in svg

Spectris PARTICLE MEASURING SYSTEMS MiniCapt, Operation Manual

Share
Download
Spectris PARTICLE MEASURING SYSTEMS MiniCapt Operation Manual Download Page 40

Installation

Chapter 2

 :  Unpacking and Installation

MiniCapt® Mobile Operations Manual

2-7

Power Up the MiniCapt

>> To power the MiniCapt ON:

1.

Be sure you have installed the battery as described on page 2-5.

2.

Be sure you have connected the power supply cord to mains power and to the 
MiniCapt as described above.

3.

Press the 

Power

 button on the lower-right side of the MiniCapt (see 

Figure 2-3

).

4.

After the MiniCapt has 

Power

, the 

Home

 screen displays (see 

Figure 2-4

).

Figure 2-4  Home

 screen

If the 

Home

 screen does not appear, test the power source and the power supply. If the 

power source, battery and power supply are installed correctly, but the unit still does 
not turn on, contact your Particle Measuring Systems technical support. 

Summary of Contents for PARTICLE MEASURING SYSTEMS MiniCapt


























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands