manualshive.com logo in svg

Spectris PARTICLE MEASURING SYSTEMS MiniCapt, Operation Manual

Share
Download
Spectris PARTICLE MEASURING SYSTEMS MiniCapt Operation Manual Download Page 39

2-6

 

MiniCapt® Mobile Operations Manual

Chapter 2

 :  Unpacking and Installation

Installation

Connect the Power Supply

WARNING

Ensure that the external AC to DC power supply has a proper earth ground supply cord.

>> To connect the power supply:

1.

Plug the power supply cord into Mains power.

2.

Plug the other end of the power supply cord into the 

Power Connector

 on the 

lower-right side of the MiniCapt (see 

Figure 2-3

).

Power 

Figure 2-3  Power Connector

Disconnect the Power Supply

>> To disconnect the power supply:

1.

Unplug the power supply cord from Mains power.

– OR –

Unplug the power supply cord from the 

Power Connector

 on the lower-right 

side of the MiniCapt (see 

Figure 2-3

).

Summary of Contents for PARTICLE MEASURING SYSTEMS MiniCapt


























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands