manualshive.com logo in svg

Spectris PARTICLE MEASURING SYSTEMS MiniCapt, Operation Manual

Share
Download
Spectris PARTICLE MEASURING SYSTEMS MiniCapt Operation Manual Download Page 179

20-2

 

MiniCapt® Mobile Operations Manual

Chapter 20

 :  Troubleshooting

Alarms and Warnings List

Alarms and Warnings List

Alarms and Warnings

Area with same name already exist.

Battery charge is below 10%

Battery charge is below 5%

BCLA

Battery charge Low Alarm

BCLW

Battery charge  Low Warning

Cannot delete. Only one administrator present.

Cannot Delete. Recipe is already assigned.

Duplicate Locations Found.

Error while importing locations.

Error while importing recipes.

Error while importing users.

File cannot be saved due to low disk space.

FRHA

flowrate High Alarm

FRHW

flowrate High Warning

FRLA

flowrate Low Alarm

FRLW

flowrate Low Warning

In CGS mode, pressure in the head is above 400 Pa.

In CGS mode, pressure in the head is above 400 Pa.

In CGS mode, pressure in the head is above 400 Pa or below 100 
Pa.

In CGS mode, pressure in the head is below 100 Pa.

In CGS mode, pressure in the head is below 100 Pa.

In CGS mode, pressure in the head is too high (500 Pa).

In CGS mode, pressure in the head is too low (0 Pa).

Invalid file selected to import.

Invalid Input

Invalid user name or password.

Location with same name already exist.

Measured flowrate is greater than 20% of the target flowrate.

Measured flowrate is greater than 5% of the target flowrate.

Measured flowrate is lower than 20% of the target flowrate.

Measured flowrate is lower than 5% of the target flowrate.

No administrator present. Protection disabled.

Summary of Contents for PARTICLE MEASURING SYSTEMS MiniCapt


























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands