manualshive.com logo in svg

Spectris PARTICLE MEASURING SYSTEMS MiniCapt, Operation Manual

Share
Download
Spectris PARTICLE MEASURING SYSTEMS MiniCapt Operation Manual Download Page 118

Set the Time and Date

Chapter 9

 :  Time and Date Setup

MiniCapt® Mobile Operations Manual

9-5

8.

In the top field of the 

SET TIME

 pane in the 

Time and Date 

screen, touch the 

minutes, then touch 

 the left arrow or 

 the right arrow to scroll to the 

current minutes.

9.

In the top field of the 

SET TIME

 pane in the 

Time and Date 

screen, touch 

AM

 or 

PM

 if necessary, then touch 

 the left arrow or 

 the right arrow to scroll 

to your choice.

10.

Touch 

 the 

Save

 button in the 

Time and Date

 screen to save the time and 

date definitions.

11.

Touch 

 

the 

Features Menu 

button to return to the 

Features Menu 

screen.

–OR–

Touch 

 

the 

Home 

button to return to the 

Home 

screen.

Summary of Contents for PARTICLE MEASURING SYSTEMS MiniCapt


























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands