SpectraLink 8440 Administration Manual Download Page 307

Page: 307 / 335

1725-86984-000_P.docx
September 2016

307

Appendix B: Session Initiation Protocol
(SIP) Information

This chapter describes the basic Session Initiation Protocol (SIP) and the protocol extensions
that the current Spectralink Software supports.

This chapter contains information on:



Basic Protocols

—All the basic calling functionality described in the SIP specification is

supported. Transfer is included in the basic SIP support.



Protocol Extensions

—Extensions add features to SIP that are applicable to a range of

applications, including reliable 1xx responses and session timers.

For information on supported RFCs and Internet drafts, see the following section.

This chapter also describes:











Reliability of Provisional Responses



Transfer



Third party call control



SIP for Instant Messaging and Presence

RFC and Internet Draft Support

The following RFC’s and Internet drafts are supported. For more information on any of the
documents, enter the RFC number at

http://www.ietf.org/rfc.html.



RFC 1321

—The MD5 Message-Digest Algorithm



RFC 2327

—SDP: Session Description Protocol



RFC 2387

—The MIME Multipart / Related Content-type



RFC 2976

—The SIP INFO Method



RFC 3261

—SIP: Session Initiation Protocol (replacement for RFC 2543)



RFC 3262

—Reliability of Provisional Responses in the Session Initiation Protocol (SIP)



RFC 3263

—Session Initiation Protocol (SIP): Locating SIP Servers



RFC 3264

—An Offer / Answer Model with the Session Description Protocol (SDP)

Summary of Contents for 8440
















































































































































































































































































































































Search results

Summary of Contents for 8440

Reviews:

Brands by name

Popular brands

SpectraLink 8440, Administration Manual

Search results

Summary of Contents for 8440

Reviews:

Brands by name

Popular brands