SpectraLink 8440 Administration Manual Download Page 236

Page: 236 / 335

Spectralink 84-Series Series Wireless Telephones Administration Guide

1725-86984-000_P.docx
September 2016

236

Table 10-24: Ice Parameters

Parameter

Permitted Values

Default

tcpIpApp.ice.mode

Disabled, Standard,
MSOCS

Disabled

Turn SIP ICE negotiation on or off. If using Skype for Business or Microsoft Lync Server 2013 or 2010. , set to
MSOCS to enable ICE.

tcpIpApp.ice.password

String

Null

Enter the password to authenticate to the TURN server.

tcpIpApp.ice.stun.server

String

Null

Enter the IP address of the STUN server.

tcpIpApp.ice.stun.udpPort

1-65535

3478

The UDP port number of the STUN server.

tcpIpApp.ice.tcp.enabled

0 or 1

If 0, TCP is disabled. If 1, TCP is enabled.

tcpIpApp.ice.turn.callAdmissionControl.enabled

0 or 1

If 0, call admission control is disabled. If 1, call admission control is enabled

tcpIpApp.ice.turn.server

String

Null

Enter the IP address of the TURN server.

tcpIpApp.ice.turn.tcpPort

1-65535

443

The TCP port number of the TURN server.

tcpIpApp.ice.turn.udpPort

1-65535

443

The UDP port number of the TURN server.

tcpIpApp.ice.username

String

Null

Enter the user name to authenticate to the TURN server.

<keepalive/>

These parameters enable the configuration of TCP keep-alive on SIP TLS connections; the
handset can detect a failure quickly (in minutes) and attempt to re-register with the SIP call
server (or its redundant pair).

Table 10-25: TCP Keep-Alive Parameters

Parameter

Permitted Values

Default

tcpIpApp.keepalive.tcp.idleTransmitInterval

10 to 7200

The amount of time to wait (in seconds) before sending the keep-alive message to the call server.

Note:

If this parameter is set to a value that is out of range, the default value is used.

tcpIpApp.keepalive.tcp.noResponseTransmitInterval

5 to 120

If no response is received to a keep-alive message, subsequent keep-alive messages are sent to the call server at
this interval (every x seconds).

Summary of Contents for 8440
















































































































































































































































































































































Search results

Summary of Contents for 8440

Reviews:

Brands by name

Popular brands

SpectraLink 8440, Administration Manual

Search results

Summary of Contents for 8440

Reviews:

Brands by name

Popular brands