SpectraLink 8440 Administration Manual Download Page 290

Page: 290 / 335

Spectralink 84-Series Series Wireless Telephones Administration Guide

1725-86984-000_P.docx
September 2016

290



The Spectralink Hosted Server is temporarily unavailable.



There isn’t any software upgrade file for the handset to download.



The network configuration is preventing the handset from connecting to the Spectralink

Hosted Server. Check for a firewall, ACL or another issue preventing the handset from
loading code from the provisioning server.

Note: Cannot upgrade through a Web proxy

Spectralink Software does not support internet access for software upgrades
through a Web proxy.

To troubleshoot an upgrade issue:



Verify that new software is available for your handset.



Verify th

at your network’s configuration will allow the handset to connect to

http://downloads.Spectralink.com



Check the web site with a computer to verify it is available and the file can download



Try upgrading the code again



Use a local provisioning server

If the issue persists, try manually upgrading your handset

’s software. To upgrade handset

software using this method, see

Setting Up the Provisioning Server

Summary of Contents for 8440
















































































































































































































































































































































Search results

Summary of Contents for 8440

Reviews:

Brands by name

Popular brands

SpectraLink 8440, Administration Manual

Search results

Summary of Contents for 8440

Reviews:

Brands by name

Popular brands