3
Program Mode allows checks and adjustments of
all system settings. Please consult your manual be-
fore making any adjustments. See page 68.
Auto Run
To Start and run for one hour, press once. Press
again for each additional hour of run time.
For Auto Fill mode, press and hold for 5 seconds
and system will run until your Tank Switch closes.
Auto Run functions always terminate with a fresh
water flush.
In Program mode, press to REDUCE value
Stop (or Start)
Press once to start or stop system.
If you stop the system by pressing stop, the sys-
tem will not fresh water flush itself.
To bypass the Purge Mode, only if you are
sure there are no chemicals in the system,
Press Auto Run and Stop, momentarily at
the same time.
Alarm Display
Push to silence alarm
When system is running, press to scroll though
system readings
In program mode, push to scroll through the sys-
tem parameters
Auto Store
Press and hold for 3 sec for one time fresh water
flush
Press once to fresh water flush and activate the
flush timer interval. The light blinks when in this
timed flush mode.
In Program mode, press to INCREASE value
MPC Controller Quick Guide
Summary of Contents for Ventura 150T MPC
