66
MPC 5000 Display Controls continued...
Stop: Pressing the Stop button in the lower left corner of the MPC display will stop any cur-
rent action. In standby mode pressing Stop will activate the manual run sequence:
The fresh water flush solenoid valve opens for 20 seconds to prime the feed pump. The
display counts down from 10, then feed pump will run.
The system will run indefinitely until the user ends the run cycle by pressing either the
Stop or Auto Store buttons.
If the Stop button is pressed to end the manual run sequence a fresh water flush will not
be initiated and raw water will sit throughout the system until another command is giv-
en. After pressing Stop it is advisable to use the Auto Store button, which will initiate a
fresh water flush and restart the flush interval timer.
Stop
Alarm/Displ: The Alarm/Displ button has several functions, depending on the current state
of the system:
Alarm Active: Pressing Alarm/Displ will silence the alarm. Pressing it again will reset the
alarm if the underlying condition has been corrected.
Default Screen: Pressing Alarm/Displ from the default screen will display the number of
hours the system has run.
During Run Cycle: Pressing Alarm/Displ during a run sequence will scroll through the wa-
termaker’s operating parameters: Run Mode, Production Volume, Feed Water Pressure,
Filter Condition, Boost Pressure (If applicable), Production Quality, and Hours.
Alarm/Disp
Summary of Contents for Ventura 150T MPC
