17
Wiring continued...
Mount the terminal block from the feed pump
and attach the pump power wires coming from
the MPC control box. Both wire bundles are
marked with green heat shrink tubing.
Run the pressure sensor cables from the MPC
control box to the filter housings. The cables are
marked red and green, to connect to their corre-
sponding sensors.
Connect the fresh water flush cable to the fresh
water flush solenoid. Crimp the attached heat
shrink butt connectors onto the two black wires
coming from the solenoid. There is no polarity.
The fresh water flush cable can be distinguished
from the diversion valve cable, both of which are
gray cables with butt connectors on their individu-
al wires. The diversion valve cable is run in a bun-
dle with the rotoflow cable, while the fresh water
flush solenoid cable runs by itself from the MPC
control box.
Fresh water flush cable from MPC box:
Fresh water flush solenoid (two black
wires, no polarity):
Summary of Contents for Ventura 150T MPC
