Spectra Watermakers Ventura 150T MPC, Installation And Operating Manual

Page: 65 / 86

65
MPC 5000 Display Controls
Auto Run: Pressing the Auto Run button in the top left corner of the display activates the
MPC’s automated run sequence:

The fresh water flush solenoid valve opens for 20 seconds to prime the feed pump. The
display will begin to count down from 10, then feed pump will run.

The system will now operate in Auto Mode for 1 hour, with the duration extended by one
hour each time Auto Run is pressed.

At the end of the run cycle, the system will perform a fresh water flush. At the end of the
fresh water flush cycle, the MPC will start the Flush Interval Timer (factory default flush
timer interval is set to 5 days; 30 days if your system includes the optional Z-Ion).

At the end of the flush timer interval countdown the watermaker will perform another
fresh water flush and restart the flush interval timer.

The flush interval and flush cycle will repeat themselves until the user enters another com-
mand.
Auto Run
Auto Store: Pressing the Auto Store button, in the top right corner of the display, will acti-
vate the automated storage sequence. This will automatically store the system, performing a
fresh water flush once every 1 - 30 days, according to the flush timer interval settings pro-
grammed into the MPC:

The fresh water flush solenoid will open and the feed pump will run.

At the end of the fresh water flush cycle, the MPC will start the flush interval timer
(factory default flush timer interval is set to 5 days; 30 days if your system includes the op-
tional Z-Ion).

At the end of the flush timer interval countdown, the watermaker will perform another
fresh water flush, and restart the flush interval timer.

This process will repeat itself until the user enters another command.
Auto Store