Spectra Watermakers Ventura 150T MPC, Installation And Operating Manual

Page: 9 / 86

9
Unpack the system and inspect it for damage during shipping. Freight damage must be report-
ed to the carrier within 24 hours.
Refer to the shipping list for your system to ensure you received all of the components listed.
Do not discard any packaging until you have found and identified all of the parts. The small
installation parts are listed on the kit list.
Warning! We will not be held responsible for shortages that are not reported within thirty
days of the ship date.
Study the system layout diagram, component photos, and descriptions before beginning in-
stallation.
Lay out the system. Before starting the installation identify where each module and compo-
nent will be placed. Ensure that there is enough clearance around the components for remov-
al of filters and system service. Make sure you have adequate tubing and hose before starting.
Additional parts may be ordered.
THE VENTURA 200T IS DESIGNED FOR WARM WATER USE. OPERATION IN WATERS BELOW 50
0
F (10
0
C) MAY CAUSE HIGH OPERATING PRESSURES AND INCREASED WEAR ON THE FEED
PUMP.
Getting Started
Ventura 150-200T MPC Shipping List:

Ventura MPC 5000 kit (includes control box and display)

Accumulator Assembly with analogue gauge

High pressure Clark Pump with membrane pressure vessel

Black high pressure filter housings

Feed pump assembly with fresh water flush module

Ventura MPC install kit with black product water tubing

Service kit

Two lengths 5/8” Hose (25’)
Optional: Z-Ion or Z-Brane system