SVC HR-1024i / HR-768i / HR-640i / HR-768si / HR-512i USER MANUAL REV 1.12
A P P E N D I C E S
9 0
9 0
9 0
9 0
The
Graph Type
text field just above the graph area displays which graph display (
Radiance
or
Reflectance
) is in
effect within the rectangular
Graphing Area
.
The
AutoSave File Counter
(Scan:0000 in the example above) displays the value of the counter that is used to
form the next AutoSave file name. The counter is incremented after each target acquisition while in AutoSave
mode. This counter may be used to tie together AutoSaved file names with notes taken regarding targets during field
acquisitions. By convention, the AutoSave file name has the format “HR.mmDDyy.XXXX.sig”, where XXXX is the
value of the AutoSave File Counter.
Note that this counter displays the count of the next target acquisition,
not the currently displayed target acquisition.
The following sections describe these features in more detail.
COMMAND BUTTON “
REFERENCE
”
The “Reference” button is used to initiate a Reference scan acquisition by the instrument. The instrument must be
“connected” to the PDA for a successful scan to be acquired. Once the scan is acquired the Radiance result will be
displayed graphically if the graph is configured to display Radiance.
COMMAND BUTTON “
TARGET
”
The “TARGET” button is used to initiate a Reference scan acquisition by the instrument. The instrument must be
“connected” to the PDA for a successful scan to be acquired. Once the scan is acquired, the Radiance result will be
displayed graphically (if the Graph mode is set to display Radiance) or the Reflectance result will be displayed (if the
Graph mode is set to Reflectance). The acquired scan can then be saved to file manually, using the FILE>SAVE
menu, or it will be automatically be saved if the File->AutoSave option is checked.
MENU BUTTON “
FILE
”
The drop down menu list for “File” consists of the following menu items:
Summary of Contents for SVC HR-1024i
Page 2: ......