Spectra Vista Corporation SVC HR-1024i, User Manual, Page: 57 / 118

SVC HR-1024i / HR-768i / HR-640i / HR-768si / HR-512i USER MANUAL REV 1.12
S P E C T R O R A D I O M E T E R 5 2 5 2 5 2 5 2
Controls several feature of the plot itself.
Line Width Sets the relative width of the line used to graph spectral
data.
Use Markers If checked, each data point plotted is marked by a square
box.
Don’t Plot Data /
From /
To
If the Don’t Plot Data checkbox is checked, the From / To
text boxes define one area of the plot that will be excluded
from display. The From / To boxes should contain valid
wavelengths (in nanometers). Note that the check boxes
affect only the displayed plot, they do not affect acquired
data stored in SIG files.
Cancel Exits this dialog without changing settings.
Apply Now
Applies changes and keeps the dialog open.
OK
Applies changes and exits the dialog.