Spectra Vista Corporation SVC HR-1024i, User Manual, Page: 56 / 118

SVC HR-1024i / HR-768i / HR-640i / HR-768si / HR-512i USER MANUAL REV 1.12
S P E C T R O R A D I O M E T E R 5 1 5 1 5 1 5 1
When the Show Target JPEGs option is checked, the target photo
associated with a scan (if it exists) will be displayed along the target’s
spectral data.
In order to be displayed, the target photo must have the same file
name as the target SIG file, with the extension “.jpg” appended. For
example, if the target SIG file is named “jarosite.sig”, then the
associated target photo must have the name “jarosite.sig.jpg” in order
to be automatically displayed.
The target photo will be displayed any time the target SIG file is
displayed in Single Graph Mode, i.e., when the target SIG file is
double-clicked in the file stack.
PLOT SETTINGS …
Configures the default X-axis, line width, and marker usage. You may
also use this menu to exclude certain areas of the plot – for example, to
exclude water absorption areas of the plot.
When Plot Settings is selected, the following dialog appears
:
X-Axis – Wavelength Control Frame
Controls the default extent of the X-Axis of the plot.
Min Wavelength Sets the default minimum X-axis wavelength to use when
displaying spectral data.
Max Wavelength Sets the default maximum X-axis wavelength to used when
displaying spectral data.
Graphing Options Frame