SVC HR-1024i / HR-768i / HR-640i / HR-768si / HR-512i USER MANUAL REV 1.12
A P P E N D I C E S
9 5
9 5
9 5
9 5
o
A single “Sec” setting – controls the total Scan Time per
scan.
o
Triple VIS/Swir1/Swir2 settings – controls the number of
coadds acquired for each spectrometer, per scan.
Optic
Sets the optic that is in use for data collection. This setting
must
match the actual foreoptic installed on the instrument, in order to
obtain correct radiometric data. The menu options are determined
by factory setting.
Integration Settings Auto
When Auto is checked, the instrument automatically determines the
optimal integration settings for all detector arrays (Si, Sw1, and Sw2).
When Auto is not checked, the operator may set individual
integration times for each detector array, using the Si/Sw1/Sw2
controls in the lower half of the setup dialog.
OK
When OK is pressed the settings are sent to the instrument and used
for operation.
Cancel
When Cancel is pressed, no changes are made to the settings.
MENU BUTTON “
HELP
”
The dropdown menu list for “Help” has the following menu items:
About:
Displays PDA software version information
Summary of Contents for SVC HR-1024i
Page 2: ......