SVC HR-1024i / HR-768i / HR-640i / HR-768si / HR-512i USER MANUAL REV 1.12
S P E C T R O R A D I O M E T E R
3 3
3 3
3 3
3 3
NOTE: This dialog is used only to setup a GPS source that is internal to the
acquisition PC or laptop. If enabled by this setup dialog, the data from this
PC/Laptop source will override the GPS that is provided by the instrument’s
internal GPS source.
GPS Port Control Frame
This frame determines the COM port
settings of the GPS data source that is
installed in the computer.
List Only Configured Ports
When selected, only ports that are
physically configured into the host
computer are listed in the COM Port
control. The list of configured ports is
built only once each time the Data
Acquisition Program is run.
List All Possible Ports
When selected, all 255 ports are listed in
the COM Port control. Use this option if
a virtual port (usually a Bluetooth port)
that you want to use is not present in the
“configured” list above.
COM Port
Determines the COM port number for
the NMEA V2.1 GPS data..
Baud Rate /
Parity /
Data Bits /
Summary of Contents for SVC HR-1024i
Page 2: ......