SVC HR-1024i / HR-768i / HR-640i / HR-768si / HR-512i USER MANUAL REV 1.12
S P E C T R O R A D I O M E T E R
8
8
8
8
Section 2 – PC Data Acquisition Software
1. INSTALLATION/REMOVAL
The instrument’s PC Data Acquisition Software is supplied either on CD or in single-executable format,
and provides for step-by-step installation onto a Windows PC or notebook computer.
The installation media is used to install the PC Data Acquisition software into an installation directory
(typically, C:\Program Files\Spectra Vista\HR1024i\ or C:\Program Files\Spectra Vista\HR768i\) on
the computer’s hard disk drive.
Recommended System Requirements
•
Operating System: Windows XP/ 7
•
CPU: 500Mhz Intel (or compatible)
•
Memory: 512M (or greater) of main memory
•
Screen Resolution: 1024x768 (or greater)
•
Serial /USB port: Provided by a built-in COM (9-pin D) port, a USB-to-Serial Adapter, or via a
Bluetooth interface (Bluetooth Serial Port)
Installation Steps
Prior to installation, reboot the computer to ensure that Windows is in a stable state, and has as few
applications running as possible.
To install the software from the CD, simply insert the installation CD into the CD drive within the
computer where you want to install the software. A screen similar to the one shown below will appear in
less than 1 minute. Follow the on-screen prompts to install the PC Data Acquisition software.
If the screen shown above does
not
appear within 60 seconds:
•
Use Windows Explorer to explore the CD.
•
Double-click on the “setup.exe” file located on the CD in order to manually run the setup.
Summary of Contents for SVC HR-1024i
Page 2: ......